Kohler K-T448 Manual Del Usuario página 3

Faucet Outlet
Port
Flange
Spout
Shank
Spout
Escutcheon
1. Install the Spout
IMPORTANT! Use care when installing the spout to avoid
scratching the finish.
Back the setscrew out of the spout or remove it to prevent
damage to the spout shank when installing the spout to the
faucet outlet port.
Insert the inlet end of the spout shank into the faucet outlet port.
Secure the spout shank using the three provided screws.
Apply plumbers putty or other sealant to the back surface of the
spout escutcheon according to the putty manufacturer's
instructions.
Press the spout escutcheon firmly against the finished wall.
Slide the spout onto the spout shank, position as desired, and
tighten the setscrew to secure the spout in place.
Remove any excess putty or sealant.
Kohler Co.
Apply plumbers
putty.
Screws
Spout
Setscrew
3 1031913-2-A