Voice Commands And Voice Tags; Hands-Free Operation - Nokia 6276 Manual Del Usuario

S e t t i n g s
The default setting for help text is On. However, you can turn help text on or off. In
the standby mode, select Menu > Settings > Phone > Help text activation.

■ Voice commands and voice tags

Before using voice tags, note the following:
• Voice tags are not language-dependent, but depend on the speaker's voice.
• You must say the name exactly as you said it when you recorded it.
• Voice tags are sensitive to background noise. Record voice tags, and use them
in a quiet environment.
• Very short names are not accepted. Use long names, and avoid similar names
for different numbers.
Note: Using voice tags may be difficult in a noisy environment or during
an emergency, so you should not rely on voice dialing in all circumstances.

Hands-free operation

You can set as many as 16 voice commands to enable hands-free operation of
certain features in your device.
Assign a voice tag to a command
Before using voice commands, you must first add a voice tag to the device function.
1. Select Menu > Settings > Voice commands.
2. Select the device function you want to tag: Profiles, Messages, Infrared,
Voice recorder, or Log.
3. If necessary, select an option associated with that function.
4. Select Start, and speak the voice tag clearly into the microphone. Do not select
Quit unless you want to cancel the recording.
82