Voice Commands And Voice Tags; Hands-Free Operation; Activate A Voice Command - Nokia 6155i Manual Del Usuario

Connection indicator
• When is shown continuously, the IR connection is activated and your
phone is ready to send or receive data using its IR port.
• When blinks, your phone is trying to connect to the other device or a
connection has been lost.

■ Voice commands and voice tags

Before using voice tags, note the following:
• Voice tags are not language-dependent, but depend on the speaker's voice.
• You must say the name exactly as you said it when you recorded it.
• Voice tags are sensitive to background noise. Record voice tags, and use them
in a quiet environment.
• Very short names are not accepted. Use long names, and avoid similar names
for different numbers.
Note: Using voice tags may be difficult in a noisy environment or during
an emergency, so you should not rely on voice dialing in all circumstances.

Hands-free operation

You can set as many as 16 voice commands to enable hands-free operation of
certain features in your device.
Assign a voice tag to a command
Before using voice commands, you must first add a voice tag to the device function.
1. In the standby mode, select
2. Select the device function you want to tag: Profiles,
Infrared, Voice recorder
3. If necessary, select an option associated with that function.
4. Select Start, and speak the voice tag clearly into the microphone. Do not
select Quit unless you want to cancel the recording.
The device replays and saves the recorded tag.
with voice tags assigned.

Activate a voice command

After you have associated a voice tag with a function in your device, to issue a
command, speak the voice tag.
1. In the standby mode, press and hold the right selection key or voice key.
Menu > Settings
or Call log.
> Voice commands.
Voice mailbox, Radio,
appears next to commands
S e t t i n g s
65