Designated Use - Abicor Binzel ABIMAGNET Traducción Del Manual De Instrucciones Original

ABIMAGNET
1 Identification
This product does not function individually. These operating
instructions describes only the earth clamp ABIMAGNET.
2 Safety
• Before using the system for the first time, please read these
operating instructions carefully.
• These operating instructions provide you with all the
information you need for trouble-free and safe operation. The
product has been developed and manufactured in
accordance with state-of-the-art methods and the recognized
safety standards and guidelines.
• The operating instructions warn you against unavoidable
residual hazards for user, third parties, devices or other
material property. The safety instructions used, which must be
adhered to, point out construction related unavoidable
residual hazards.
2.1

Designated use

• The device described in these instructions may be used only
for the purpose and in the manner described in these
instructions. When doing so, please observe the operating,
maintenance and servicing conditions.
2.2 Basic
• Before carrying out specific work, for example putting into
operation, operation, transport and maintenance, read the
operating instructions carefully and be sure to follow them.
• Keep the operating instructions within easy reach at the
device for reference.
• Enclose the operating instructions when handing over the
product.
• Please observe the operating instructions of the individual
welding components, such as: Welding power supply and
wire feeding device.
2.3 Electro-technical
• Do not expose electric tools to rain and avoid a moist or wet
environment.
• Do not use the electric tools in areas subject to fire or
explosion hazards.
2.4 Welding
• Arc welding may cause damage to eyes, skin and hearing!
Please always wear the required safety clothing, eye and ear
protection in compliance with the relevant regulations in the
country in question.
• Any metal vapors, especially lead, cadmium, copper and
beryllium are harmful! Ensure sufficient ventilation or
extraction. Do not exceed the current MAC values.
• Rinse work-pieces that have been degreased with chlorinated
solvents with clear water. Otherwise there is a risk of
phosgene gas formation. For the same reason, no degreasing
baths containing chlorine must be placed in the vicinity of the
welding area.
2.5 Technical State
• Do not exceed the maximum limit values of the load data.
Overloading leads to torch destruction.
• Do not make any constructive changes to this device.
BAL.0831.0 • 2020-09-18
The product may only be used with original ABICOR BINZEL
spare parts.
• Non-observance of these safety instructions may result in risks
to the life or health of personnel, environmental damage or
material damage. The product may only be operated in a
techincally perfect condition in compliance with the operating
instructions.
• The manufacturer will accept no liability for damage caused
by non-observance of the operating instructions.
• Use suitable means to protect yourself and bystanders from
the hazards listed in chapter on safety.
• Any other use is considered improper.
• Unauthorized modifications or changes to enhance the
performance are not permitted.
• Please observe the accident prevention regulations of the
country in question.
• Putting into operation, operating and maintenance work may
only be carried out by qualified personnel. Qualified
personnel are persons who, based on their special training,
knowledge, experience and due to their knowledge of the
relevant standards, are able to assess the tasks assigned to
them and identify possible dangers.
• Keep the work area in order.
• Ensure good lighting of the work area.
• Protect yourself from electric shock by using insulating mats
and wearing dry clothing.
• Check the electric tool for damage and for its perfect
functioning in accordance with its designated use.
• In connection with various welding torches, there may be other
hazards, for example those caused by: electrical current
(power supply, internal circuit), welding spatter with regard to
combustible or explosive materials, UV radiation from the arc,
smoke and vapors.
• Adhere to the general fire protection regulations and remove
inflammable materials from the surroundings of the welding
work area, prior to starting work. Even hours after finishing
the welding work, there is a risk of late ignition caused by
sparks. Place appropriate fire extinguishing equipment in the
workplace within easy reach.
• During welding work outdoors, use suitable protection
against the effects of weather.
EN - 17