Designated Use; Obligations Of The Operator - Abicor Binzel MT 452 W Instrucciones De Servicio

MT/AUT/AUT RAB
1 Identification
1.1 CE marking
2 Safety

2.1 Designated use

2.2 Obligations of the operator

The MIG/MAG welding torches are used in industry and in the trade for inert
gas welding using inert gases (MIG) or active gases (MAG). They are
available as machine-operated torches and can be used in all welding
positions. Depending on the model, they are air- or liquid-cooled. The liquid-
cooled model requires a re-circulating cooling unit. These operating instructions
only describe MIG/MAG welding torches MT/AUT/AUT RAB.
The MIG/MAG welding torches may only be operated using original
ABICOR BINZEL spare parts.
This device fulfills the requirements of the valid EU directives.
The conformity is confirmed by the CE marking on the
device.
The attached safety instructions must be observed.
• The device described in these instructions may be used only for the
purpose and in the manner described in these instructions. In doing so,
observe the operating, maintenance and servicing conditions.
• Any other use is considered improper.
• Unauthorised modifications or changes to enhance the performance are
not permitted.
• Store the operating instructions within easy reach of the device for
reference and enclose them when passing on the product.
• Commissioning, operating and maintenance work may only be carried out
by qualified personnel. Qualified personnel are persons who, based on
their special training, knowledge and experience, are able to assess the
tasks assigned to them and identify possible dangers
(in Germany, see TRBS 1203).
• Keep other people out of the work area.
• Please observe the occupational health and safety regulations of the
relevant country.
• Ensure the work area is well lit and keep it clean.
1 Identification
EN - 3