Cub Cadet Time Saver Manual Del Usuario página 16

Installing / Removing Mulch Baffle
WARNING!
mulch plug, disengage blades, stop the engine and
remove key to prevent unintended starting.
1. Stop the engine and wait for all parts to stop moving.
Installing the Mulch Baffle
1. Insert the right-side tab (A) of the baffle into the bracket on
the deck. See Fig. 5-1.
2. Insert the mulch baffle into the discharge opening (B), See
Fig. 5-1.
3. Once it's positioned in the deck opening, push the baffle
towards the rear of the mower (C) to secure it in place.
See Fig. 5-1.
Removing the Mulch Baffle
1. Slide the baffle to the right (toward the front of the mower)
to disengage the slot from the mower deck and then pry
the left-side of the baffle outward.
16 s 5— O
ectiOn peratiOn
Before installing or removing the
C
B
A
Figure 5-1