Kenwood FDM31 Instrucciones página 8

Safety
Read these instructions carefully and retain for future
reference.
Remove all packaging and any labels.
If the plug or cord is damaged it must, for safety reasons, be
replaced by Kenwood or an authorised Kenwood repairer in
order to avoid a hazard.
DO NOT touch the sharp blades. The blades and discs are
very sharp, handle with care. Always hold by the finger grip
at the top, away from the cutting edge, when handling
the sharp cutting blades, emptying the bowl and during
cleaning.
DO NOT process hot ingredients.
Be careful if hot liquid is poured into the food processor
or blender as it can be ejected out of the appliance due to
sudden steaming.
Never leave the appliance unattended when it is operating.
Do not exceed the maximum capacities stated in the
recommended usage chart.
Do not operate your appliance for longer than the
times specified below without a rest period. Processing
continuously for longer periods can damage your appliance.
Function/Attachment
Blender/Blend-Xtract 2GO
Heavy mixtures in the
bowl (e.g. Dough)
Mini Chopper/Mill
Grinding Mill
Do not lift or carry the processor by the handle - or the handle
may break resulting in injury.
Always remove the knife blade before pouring contents from
the bowl.
Keep hands and utensils out of the processor bowl and
blender goblet whilst connected to the power supply. If food
needs to be pushed down use a suitable utensil such as a
spatula.
Always switch off the appliance and disconnect from
the supply if it is left unattended and before assembling,
disassembling or cleaning.
Never use your fingers to push food down the feed tube.
Always use the pusher supplied.
Never fit the blade assembly to the power unit without the
goblet/bottle or mill jar/lid fitted.
English
Maximum
Operation Time
60 secs
60 secs
30 secs
60 secs
2
09
Rest Period
Between
Operations
Unplug the
appliance and
allow to cool
down for 15
minutes