Lubricating The Blades; Maintaining The Blades - DeWalt DXGHT22 Manual Del Operador

ENGLISH
MAINTENANCE - Continued

Lubricating the Blades

WARNING:
personal injury, always wear gloves
when handling the blade.
For easier operation and longer blade life,
lubricate the blades BEFORE and AFTER each
use. Never lubricate the blades while the engine
is running or the blades are moving.

Maintaining the Blades

WARNING:
gloves when handling or cleaning
the blades.
The cutting blades are made of high-quality,
hardened steel. During normal use, they will not
require resharpening unless they become
nicked by contact with hard objects, such as
wire fencing, glass, stones or bricks.
To avoid serious
Always wear heavy
1. Stop the unit. Wait for all moving parts to
stop. Allow the unit to cool. Disconnect the
spark plug wire to prevent the unit from
starting accidentally.
2. Apply a light machine oil along the edge of
the top blade (Fig. 16). Apply oil along the
full length of the blade.
Fig. 16
If a nick occurs and it interferes with operation:
1. Stop the unit. Wait for all moving parts to
stop. Allow the unit to cool. Disconnect the
spark plug wire to prevent the unit from
starting accidentally.
2. Use a fine-toothed file or sharpening stone
to remove the nick.
24