Network Topologies; Standalone Topology - Allied Telesis AT-FS708 Guia De Instalacion

Network Topologies

Standalone
Topology
The AT-FS708 switch can be used in a variety of network topologies, such
as a standalone or cascade. Both topologies are described below.
Figure 3 illustrates the standalone topology where each end-node is
directly connected directly to a 10/100Base-TX port on an AT-FS708
switch. This gives each end-node a dedicated 10 Mbps or 100 Mbps link.
AT-FS708
LINK/ACT
8 Port 10/100 Mbps Fast Ethernet Switch
10 Mbps
100 Mbps
AT-FS708 Fast Ethernet Switch Installation Guide
Workstations
POWER
100M
FDX
1 2 3 4 5 6 7 8
1 2 3
Workstations
Figure 3. Standalone Topology
4 5 6 7 8
Server
996
19