Descargar Imprimir esta página

Hinkley 980011FAL Instrucciones De Instalación

Publicidad

Idiomas disponibles

Idiomas disponibles

Enlaces rápidos

Control is only compatible with the following Hinkley fans
980011: Indy 56" (900956)
980011: Indy 72" (900972)
BE SURE TO FOLLOW ALL STEPS IN THE ORDER GIVEN.
BE SURE POWER IS OFF AT FUSE, OR CIRCUIT BREAKER BOX.
WARNING: To avoid fire, shock and serious personal
injury, follow these instructions:
A. Read your owner's manual carefully, retain owner's
manual for future reference.
B. To avoid possible electrical shock, be sure
electricity is turned off at the fuse box or circuit
breaker panel before wiring.
C. This switch is designed for ceiling fan only, to avoid
overheating and possible damage to other
equipment, do not install to control receptacle,
fluorescent
lighting
appliance, transformer-supplied appliance or near
heat source.
D. All wiring must conform to national and local
electrical codes. If you feel you do not have
enough electrical knowledge, have a licensed
electrician install the control.
E. Total amperage and/ or wattage for your fan should
not exceed 120 Volts, 60 HZ, 1.25A (Max.)
1. Turn power OFF at fuse box or circuit breaker and
remove the existing wall plate and switch, do not
remove wires before noting their position. (Figure 1).
2. Make wire connections (Figure 2) and secure with
wire nuts supplied.
● Connect the black wire from the fan to black wire
from the wall control.
● Connect the white (neutral) wire from the ceiling to
the white wire from the fan.
● Connect the black (hot) wire from the ceiling to the
black wire from the wall control.
● If your outlet box has a ground wire (green or bare
copper) connect the wall control's ground wire to
it; otherwise connect the wall control's ground wire
directly to one of the screws from the outlet box.
3. Attach the control to the outlet (wall) box and secure
with 2 outlet box screws (Figure 3).
4. Attach the wall plate over the wall control and secure
with the two screws provided (Figure 3).
For Warranty Information please visit www.hinkley.com
fixture,
motor-operated
4 SPEED CEILING FAN
INSTALLATION INSTRUCTIONS
READ AND SAVE THESE INSTRUCTIONS
Outlet box
Fig. 1
Hot
Black
4
3
Black
2
1
120 VAC
Green/
60Hz
Ground
Wall control
White
Neutral
Fig. 2
Outlet box
Wall control
Screws
Fig. 3
WALL CONTROL
Model: 980011FAL
Switch
Wall plate
Black
Black
White
Fan
Wall plate
Screws

Publicidad

loading

Resumen de contenidos para Hinkley 980011FAL

  • Página 1 4 SPEED CEILING FAN WALL CONTROL INSTALLATION INSTRUCTIONS Control is only compatible with the following Hinkley fans Model: 980011FAL 980011: Indy 56" (900956) 980011: Indy 72" (900972) READ AND SAVE THESE INSTRUCTIONS BE SURE TO FOLLOW ALL STEPS IN THE ORDER GIVEN.
  • Página 2 DE PARED DEL VENTILADOR DE TECHO DE 4 VELOCIDADES El control solo es compatible con los siguientes ventiladores Hinkley Modelo: 980011FAL 980011: Indy 56" (900956) LEA Y GUARDE ESTAS INSTRUCCIONES 980011: Indy 72" (900972) ASEGÚRESE DE SEGUIR TODOS LOS PASOS EN LA ORDEN DADA.
  • Página 3 LA COMMANDE MURALE DU VENTILATEUR DE PLAFOND À 4 VITESSES La commande n'est compatible qu'avec les Modèle:980011FAL ventilateurs Hinkley suivants 980011: Indy 56" (900956) LISEZ ET CONSERVEZ CES INSTRUCTIONS 980011: Indy 72" (900972) ASSUREZ-VOUS DE SUIVRE TOUTES LES ÉTAPES DE L'ORDRE DONNÉ.