Working In Self-Leveling Mode - Milwaukee M12 CLLP Manual Original

WORKING IN SELF-LEVELING MODE

In self-leveling mode the cross laser will level itself in a ± 4° range and can project a
horizontal beam, a vertical beam or both beams simultaneously + plumb dot up and down.
1
Place the cross laser on a solid
fl at vibration free surface or on a
tripod.
2
Turn the rotation dial to: .
3
The cross laser will generate
2 laser beams.
(A) horizontal beam forward
(B) vertical beam forward
(C) Laser point
(D) The cross laser will generate
forward cross beam when all
beams are activated.
ENGLISH
1/4" male thread
5/8" male thread
C
B
D
A
C
4
Choose the beams that
you want to work with by
pushing the MODE button.
5
> 4°
If the initial level of the
cross laser is beyond ±4°
and the self-leveling
> 4°
mode is activated, the
laser beams will fl ash
.
In this case reposition the
cross laser.
6
Before moving the cross laser, turn the
rotation dial to: .
This will lock the pendulum and
protect your cross laser.
7