Briggs & Stratton BSP5500L Manual Del Propietário página 4

Ocultar thumbs Ver también para BSP5500L:
Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

WARNING
;ENERATOR
Disconnect the spark plug wire from the spark plug and place
the wire where it cannot contact spark plug.
WARNING
DO NOT touch hot surfaces.
Allow equipment to cool before touching.
CAUTION
DO NOT tamper with governed speed. Generator supplies
correct rated frequency and voltage when running at governed
speed.
DO NOT modify generator in any way.
CAUTION
See"Don't Overload Generator" on page 9.
Start generator and let engine stabilize before connecting
electrical loads.
Connect electrical loads in OFF position, then turn ON for
operation.
Turn electrical loads OFF and disconnect from generator
before stopping generator.
CAUTION
Use generator only for intended uses.
If you have questions about intended use, ask dealer or
contact Briggs & Stratton service center.
Operate generator only on level surfaces.
DO NOT expose generator to excessive moisture, dust, dirt,
or corrosive
vapors.
DO NOT insert any obiects through cooling slots.
{f connected devices overheat, turn them off and disconnect
them from generaton
Shut off generator if.'
-electrical output is lost;
-equipment sparks, smokes, or emits flames;
-unit vibrates excessively.

Publicidad

Tabla de contenido
loading

Tabla de contenido