Lenco BT-190 Light Manual Del Usuario página 8

Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

C. Power ON and Pairing
1. Slide "ON/OFF switch (1)" on the device to ON till to listen "DUDU",
the Bluetooth searching are open;
2. "Bluetooth (10)" LED is fast blinking in blue.
3. Then, activate the Bluetooth function in your Bluetooth device (such
as Mobile Phone); the device will enter to Bluetooth searching mode
automatically, if not, tap the relate selection to manually enter to
searching mode. (refer to your device's manual when necessary)
4. Your Bluetooth device should show "BT-190" in list, and then select it
for pairing. Waiting for some seconds and you will see connected
message as shown on your mobile device. If pairing is successful, a
tone will sound "DU" and the "Bluetooth (10)" LED will keep lighting
blue slowly.
5. Now, you can start to music play from the mobile device by its music
player program.
6. Slide "ON/OFF switch (1)" to OFF when it is not in use.
D. Disconnect from paired device
1. To disconnect with paired device and for better result, turn Off the
Bluetooth Speaker by Slide the "ON/OFF switch (1)" to OFF directly;
2. Or, you can choose "Disconnect" from Bluetooth paired device list on
your mobile device;
3. In this case; the Bluetooth Speaker will turn back into
"Searching/Pairing" mode in seconds, the "Bluetooth (10)" LED will
turn to fast blinking in blue from slowly blinking.
4. Now, you can process for new mobile device pair or power Off the
Bluetooth Speaker if you wanted.
5. Notice: even disconnected Bluetooth for long time but it will be
reconnected when you come back to use this speaker.
E. Auto reconnect with paired device
1. Every time you turn On the Bluetooth Speaker's power; it will firstly
searching for the mobile device which has been paired previously and
still in record;
2. The Bluetooth Speaker will reconnect this mobile device as priority if
it in Bluetooth searching device mode and in connection range.
3. If no device found in some seconds, then the Bluetooth Speaker will
automatically turn into pairing mode.
4. Now you can process for new mobile device pair.
F. Use NFC for fast Bluetooth pairing
a. On Bluetooth Speaker:
1. Turn on the unit
8

Publicidad

Tabla de contenido
loading

Tabla de contenido