Inspecting And Replacing Anode(S) - Yamaha 200GETO Manual Del Propietário

5) With the outboard motor in a vertical
position, and using a flexible or pres-
surized filling device, inject the gear
oil into the oil drain plug hole.
Gear oil grade/capacity:
Refer to "SPECIFICATIONS," page 4-1.
6) When the oil begins to flow out of the
oil level plug hole, insert and tighten
601033
the oil level plug.
7) Insert and tighten the oil drain plug.
EMU00831
INSPECTING AND REPLACING
ANODE(S)
Yamaha outboard motor is protected
from corrosion by a sacrificial anode(s).
Check the anode(s) periodically. Remove
the scales from surfaces of the anode(s).
For the inspection and replacement of the
anode(s), consult a Yamaha dealer.
603024
cC
Do not paint the anode(s), for this would
render it ineffective
405016
4-20
GB