Tilt Support Lever; Top Cowling Lock Levers; Flushing Device - Yamaha 200GETO Manual Del Propietário

EMU00157

TILT SUPPORT LEVER

To keep the outboard motor in the tilted-
up position, lock the tilt support lever to
the clamp bracket.
403033
EMU00163

TOP COWLING LOCK LEVERS

To remove the engine top cowling, pull
up the front and rear lock levers. Then lift
off the cowling. When replacing the cowl-
ing, check to be sure it fits properly in the
rubber seal. Then lock the cowling again
by moving the levers downward.
301021
301022
EMU01146

FLUSHING DEVICE

This device 1 is used to clean the cooling
water passages of the motor using a gar-
den hose and tap water.
NOTE:
Refer to "Cleaning Cooling-water Pas-
q
sages" in Chapter 4 for instructions on
usage.
000825
2-21
GB