Residual Risks; Package Contents; Electrical Safety - DeWalt DW392 Traducido De Las Instrucciones Originales

EN GLI SH

Residual Risks

In spite of the application of the relevant safety
regulations and the implementation of safety
devices, certain residual risks cannot be avoided.
These are:
– Impairment of hearing .
– Risk of personal injury due flying particles.
– Risk of burns due to accessories becoming hot
during operation.
– Risk of personal injury due to prolonged use.
Markings on Tool
The following pictograms are shown on the tool:
Read instruction manual before use.
Do not expose the power tool to humidity.
Do not use the power tool if the main
cable is damaged.
DATE CODE POSITION (FIG. 1)
The Date Code (r), which also includes the year of
manufacture, is printed into the housing.
Example:
2010 XX XX
Year of Manufacture

Package Contents

The package contains:
1 Alligator saw
1 TCT saw blade set for cellular concrete and
plaster board (DW392)
1 TCT saw blade set for low density building
blocks (DW393)
1 TCT saw blade set for medium density building
blocks (DW394)
1 Saw blade guard
2 Side handles with fixing screws
1 Hex key
1 Cutting slot scraper
1 Instruction manual
1 Exploded drawing
• Check for damage to the tool, parts or
accessories which may have occurred during
transport.
24
• Take the time to thoroughly read and
understand this manual prior to operation.
Description (fi g. 1)
WARNING: Never modify the power
tool or any part of it. Damage or
personal injury could result.
a. On/off-switch
b. Lock-off button
c. Front handle
d. Side handles
e. Saw blades
f. Bar
g. Saw blade guard
h. Saw blade fixing screws
i. Hex key
j. Housing
k. Oil hole
l. Saw blade guide slot
INTENDED USE
Your D WALT alligator saw DW392/DW393/DW394
E
is a versatile power tool that has been designed for
professional sawing applications.
DW392: Cutting of cellular concrete and plaster
board.
DW393: Cutting of low density building blocks.
DW394: Cutting of medium density building blocks.
DO NOT use under wet conditions or in presence of
flammable liquids or gases.
DO NOT let children come into contact with the
tool. Supervision is required when inexperienced
operators use this tool.

Electrical Safety

The electric motor has been designed for one
voltage only. Always check that the power supply
corresponds to the voltage on the rating plate.
Your D WALT tool is double insulated in
E
accordance with EN 60745; therefore no
earth wire is required.
If the supply cord is damaged, it must be replaced
by a specially prepared cord available through the
D WALT service organisation.
E