Storing Your Iron; Maintaining Your Iron; Cleaning The Soleplate - Sunbeam 3980 Manual Del Usuario

S Y
TORING OUR
1. Allow the iron to cool.
2. If you do not use your iron on a daily basis, empty the water reservoir
after each use for a longer iron life. To do so, turn the iron upside
down to allow water to flow from the fill hole. Shake the iron gently
to remove trapped water drops.
3. Loosely loop the power cord together and store the iron on its heel rest.
Important: Wrapping the cord around the iron too tightly can damage
the cord.
Tip: When not ironing, always set the Steam dial to DRY and the Fabric
Select dial to OFF.

Maintaining Your Iron

C
LEANING THE
Clean the soleplate if starch or other residue accumulate.
To clean the Soleplate:
1. Allow the iron to cool and then wipe it with a soft, damp cloth.
WARNING: DO NOT use abrasive cleansers, scouring pads or
vinegar to clean the soleplate, this will damage the finish.
2. Run the iron over an all-cotton cloth to remove any residue.
I
RON
S
OLEPLATE
9 9 9