Storing Y Our Iron; Maintaining Y Our Iron - Sunbeam HOSPITALITY 4211 Manual De Instrucciones

T O y
URNING FF
1. Turn the Steam Lever to
2. Unplug the iron from the power source.
WARNING: NEVER yank the power cord when unplugging the iron. This can damage the cord.
S y
TORING OUR
1. Turn iron OFF. Allow the iron to cool.
2. I f you do not use your iron on a daily basis, empty the water reservoir after each use for a longer iron
life. To do so, unplug the iron, turn the iron upside down, open the fill hole cover, and allow water to
flow from the fill hole. Shake the iron gently to remove trapped water drops.
3. L oosely loop the power cord around the heel rest and store the iron on its heel rest.
I : Wrapping the cord around the iron too tightly can damage the cord.
MPORTANT
T
: When not ironing, always set the Steam Lever to
IP
c S
lEANING ThE
Clean the soleplate if starch or other residue accumulate.
To clean the Soleplate:
1. T urn iron OFF. Allow the iron to cool and then wipe it with a soft, damp cloth.
WARNING: DO NOT use abrasive cleansers, scouring pads or vinegar to clean the soleplate. This will
damage the finish.
2. Run the iron over an all-cotton cloth to remove any residue.
U S
SING ThE ElF
You should use the Self-Cleaning feature once a month to maintain the optimal performance of your
iron.
To use the Self-Cleaning feature:
1. M ove the Steam Lever back and forth from
from the Steam Valve. This keeps water flowing into the steam chamber.
c F
ARING OR
I
OUR RON
O
/Off (Dry) and Fabric Select Dial to Off.
I
RON
M
AINTAINING
OlEPlATE
c F
lEANING EATURE
y I A
OUR RON
O
/Off (Dry) and the Fabric Select Dial to Off.
y I
OUR RON
O
/Off (Dry) several times to remove debris and minerals
5
U
FTER SE