Bosch Professional GSH 5 CE Manual Original página 15

OBJ_BUCH-419-003.book Page 15 Wednesday, February 27, 2008 8:50 AM
Always wait until the machine has come to
a complete stop before placing it down. The
tool insert can jam and lead to loss of control
over the power tool.
Never use the machine with a damaged ca-
ble. Do not touch the damaged cable and
pull the mains plug when the cable is dam-
aged while working. Damaged cables in-
crease the risk of an electric shock.
Functional Description
Read all safety warnings and all in-
structions. Failure to follow the
warnings and instructions may re-
sult in electric shock, fire and/or se-
rious injury.
While reading the operating instructions, unfold
the graphics page for the machine and leave it
open.
Intended Use
The machine is intended for chiselling work in
concrete, brick, masonry and asphalt as well as
for driving in and compacting, when using the
respective accessories.
Product Features
The numbering of the product features refers to
the illustration of the machine on the graphics
page.
1 Dust protection cap
2 Locking sleeve
3 Chisel adjustment ring (Vario-Lock)
4 Vibration damper
5 On/Off switch
6 Thumbwheel for preselection of impact rate
7 Service indicator
8 Stand-by indicator
9 Auxiliary handle
10 Knurled nut for auxiliary handle
The accessories illustrated or described are not in-
cluded as standard delivery.
Bosch Power Tools
Technical Data
Demolition Hammer
Article number
Rated power input
Impact rate bpm
Impact energy per
stroke
Chisel positions
Tool holder
Lubrication
Weight according
to EPTA-Procedure
01/2003
Protection class
The values given are valid for nominal voltages [U] of
230/240 V. For lower voltage and models for specific
countries, these values can vary.
Please observe the article number on the type plate of
your machine. The trade names of the individual ma-
chines may vary.
Declaration of Conformity
We declare under our sole responsibility that
the product described under "Technical Data" is
in conformity with the following standards or
standardization documents: EN 60745 accord-
ing to the provisions of the directives
2004/108/EC, 98/37/EC (until 28 Dec 2009),
2006/42/EC (from 29 Dec 2009), 2000/14/EC.
2000/14/EC: Measured sound power level
97 dB(A). Conformity assessment procedure ac-
cording to Annex VI.
Notified body:
TÜV NORD CERT GmbH & Co. KG,
Am TÜV 1, 30519 Hannover
Technical file at:
Robert Bosch GmbH, Postfach 10 01 56,
D-70745 Leinfelden-Echterdingen
1 609 929 L45 | (27.2.08)
English | 15
GSH 5 CE
Professional
3 611 C21 0..
W 1150
1300 – 2900
J 2 – 13
12
SDS-max
Central
permanent
lubrication
kg 5.8
/ II