Bosch Professional GSH 5 CE Manual Original página 18

OBJ_BUCH-419-003.book Page 18 Wednesday, February 27, 2008 8:50 AM
18 | English
Working Advice
Vibration Damper
The integrated vibration damper in the main
handle and at the hammer mechanism reduces
occurring vibrations.
Maintenance and Service
Maintenance and Cleaning
Before any work on the machine itself, pull
the mains plug.
For safe and proper working, always keep
the machine and ventilation slots clean.
A damaged dust protection cap should be
changed immediately. We recommend hav-
ing this carried out by an after-sales serv-
ice.
Service Indicator 7
When the carbon brushes are worn out, the ma-
chine switches itself off. This is indicated ap-
prox. 8 hours beforehand by the lighting or
blinking of the service indicator 7. The machine
must then be sent to an after-sales service
agent. Addresses are listed in the Section "Af-
ter-sales Service and Customer Assistance".
Stand-by Indicator 8
When the mains plug is plugged in and mains
voltage is given, the stand-by indicator 8 must
be lit. When the machine cannot be switched on
despite lit stand-by indicator 8, it must be sent
to an after-sales service agent; for addresses,
see section "After-sales Service and Customer
Assistance", page 18.
If the machine should fail despite the care taken
in manufacturing and testing procedures, repair
should be carried out by an after-sales service
centre for Bosch power tools.
1 609 929 L45 | (27.2.08)
In all correspondence and spare parts order,
please always include the 10-digit article
number given on the type plate of the machine.
WARNING! Important instructions for con-
necting a new 3-pin plug to the 2-wire cable.
The wires in the cable are coloured according to
the following code:
Do not connect the blue or brown wire to the
earth terminal of the plug.
Important: If for any reason the moulded plug is
removed from the cable of this power tool, it
must be disposed of safely.
After-sales Service and Customer
Assistance
Our after-sales service responds to your ques-
tions concerning maintenance and repair of your
product as well as spare parts. Exploded views
and information on spare parts can also be
found under:
www.bosch-pt.com
Our customer consultants answer your ques-
tions concerning best buy, application and ad-
justment of products and accessories.
Great Britain
Robert Bosch Ltd. (B.S.C.)
P.O. Box 98
Broadwater Park
North Orbital Road
Denham
Uxbridge
UB 9 5HJ
Tel. Service: +44 (0844) 736 0109
Fax: +44 (0844) 736 0146
E-Mail: SPT-Technical.de@de.bosch.com
Bosch Power Tools