Gamma Menu; Zoom Menu; Menu Position Menu; Input Sensing On/Off Menu - Sony SDM-S204E Manual De Instrucciones

4 Press the m/M buttons to select R (Red) or B (Blue)
and press the OK button. Then press the m/M
buttons to adjust the color temperature and press
the OK button.
Since this adjustment changes the color temperature by
increasing or decreasing the R and B components with respect
to G (green), the G component is fixed.
5 Press the m/M buttons to select
OK button.
The new color setting is stored in memory and automatically
recalled whenever "USER" is selected.
The COLOR menu appears on the screen.

GAMMA menu

You can associate the picture's color shade on the screen with the
picture's original color shade.
GAMMA
GAMMA 1
GAMMA 2
GAMMA 3
1 6 0 0
Note
You can adjust the GAMMA for each ECO mode.
1 Press the MENU button.
The main menu appears on the screen.
2 Press the m/M buttons to select
press the OK button.
The GAMMA menu appears on the screen.
3 Press the m/M buttons to select the desired mode
and press the OK button.

ZOOM menu

The monitor is set to display the picture on the screen in full,
irrespective of the picture's mode or resolution in the default
setting (FULL2).
You can also view the picture in its actual aspect ratio or
resolution.
Z O O M
F U L L 2
F U L L 1
R E A L
1 6 0 0
Note
Settings in the ZOOM menu can be made for the current input. You can
also adjust settings for other inputs.
1 Press the MENU button.
The main menu appears on the screen.
2 Press the m/M buttons to select
press the OK button.
, then press the
x 1 2 0 0 / 6 0 H z
E X I T
(GAMMA) and
x 1 2 0 0 / 6 0 H z
E X I T
(ZOOM) and
The ZOOM menu appears on the screen.
3 Press the m/M buttons to select the desired mode.
• FULL2 (The default setting): The input signal is
displayed on the screen in full, irrespective of the
picture's mode or resolution.
• FULL1: The input signal is displayed on the screen at its
actual aspect ratio. Therefore, black bands may
appear at the top and bottom of the picture,
depending on the signal.
• REAL: The input signal is displayed on the screen at its
actual resolution. Sub-1600 × 1200 signals are
displayed at the center of the screen surrounded
by a black frame.
Note
When you use 1600 × 1200 resolution signals, the above mentioned
settings are not available. The picture is displayed on the screen in full.

MENU POSITION menu

You can change the menu position if it is blocking an image on
the screen.
M E N U P O S T O N
1 6 0 0 x
1 Press the MENU button.
The main menu appears on the screen.
2 Press the m/M buttons to select
POSITION) and press the OK button.
The MENU POSITION menu appears on the screen.
3 Press the m/M buttons to select the desired position
and press the OK button.
You can choose one of 9 positions where the menu will
appear.

INPUT SENSING ON/OFF menu

When you select AUTO ON in the INPUT SENSING ON/OFF
menu, the monitor automatically detects an input signal to an
input terminal, and changes the input automatically before the
monitor goes into the power saving mode.
I N P U T S E N S I N G
AU TO O N
AU TO O F F
1 6 0 0 x
1 Press the MENU button.
The main menu appears on the screen.
I I
1 2 0 0 / 6 0 H z
E X I T
(MENU
1 2 0 0 / 6 0 H z
E X I T
15
GB