Connections To Be Made - Axxess AXGMLN-01 Instrucciones De Instalación

Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

Applications
BUICK
Enclave
2008-up
Lucerne
2006-2011
CADILLAC
DTS †
2006-2011
Escalade, Escalade ESV & EXT †
2007-2011
SRX †
2007-2009
CHEVROLET
Avalanche ∆
2007-2013
Captiva Sport
2012-2015
Equinox
2007-2009
Express ‡
2008-up
Impala
2006-2013
Impala Limited
2014-2016
Monte Carlo
2006-2007
Silverado (new body) ∆
2007-2013
Silverado 2500/3500 ∆
Suburban ∆
2007-2014
Tahoe ∆
2007-2014
Traverse
2009-up
† These vehicles are standard for a factory amplifier. Either use the AXGMLN-02 interface,
or bypass the amplifier.
‡ Only for models without NAV in 2011-2015. For models with NAV, use the AXGMLN-08.
∆ Only for models without NAV in 2012-up. For models with NAV, use the AXGMLN-08.
GMC
Acadia
Acadia Limited
Savana ‡
Sierra 2500/3500 ∆
Sierra (new body) ∆
Yukon / Yukon XL ∆
HUMMER
H2 †
PONTIAC
Torrent
SATURN
Outlook
Vue
SUZUKI
XL-7
2014
AXGMLN-01

Connections to be made

From the 16-pin harness with stripped leads to the aftermarket radio:
2007-2016
• Connect the Red wire to the accessory wire.
2017
2008-up
Note: If installing an AXSWC (sold separately), there will be an accessory wire
2014
there to connect as well.
2007-2013
2007-2014
• If the aftermarket radio has an illumination wire, connect the Orange/White
wire to it.
2008-2009
• If the aftermarket radio has a mute wire, connect the Brown wire to it. If the
mute wire is not connected, the radio will turn off when OnStar is activated.
2007-2009
• Connect the Gray wire to the right front positive speaker output.
• Connect the Gray/Black wire to the right front negative speaker output.
2007-2010
2008-2010
• Connect the White wire to the left front positive speaker output.
• Connect the White/Black wire to the left front negative speaker output.
2007-2009
The following (3) wires are only for multimedia/navigation radios that require these wires.
• Connect the Blue/Pink wire to the VSS/speed sense wire.
• Connect the Green/Purple wire to the reverse wire.
• Connect the Light Green wire to the parking brake wire.
2

Publicidad

Capítulos

Tabla de contenido
loading

Tabla de contenido