Assembly Instructions - Kobalt SGY-AIR229 Manual Del Usuario

ASSEMBLY INSTRUCTIONS

1. Remove the air inlet protective cap from
the air inlet (G). (See Figure 1)
2. Tighten male plug (not included), turning
clockwise with a wrench (not included) for
air tight connection.
DO NOT OVERTIGHTEN.
NOTE Use threaded sealant tape
(not included) on the threading of
the male plug.
3. Place 2 - 3 drops of air tool oil
(not included) into the male plug before
each use (See Figure 3).
1
2
3
10
G
G
G