Festo Metal Halide Lamp EduTrainer Manual De Instrucciones página 32

•
Power reduction via DALI bus
The existing DALI bus interface can be used to connect a DALI controller, thus
allowing the device to be integrated into a building automation system. Unlike the StepDIM function, this
option can be used to turn the control to any intermediate value within the permissible dimming range.
However, the same dimming times still apply.
Application example 2:
For a detailed description of the power reduction, please refer to the manufacturer's documentation.
You can get digital copies of the product data from the manufacturer:
OSRAM GmbH
Marcel-Breuer-Straße 6
80807 Munich
Germany
www.osram.de
Electronic ballast unit (-T1)
Osram PTo 50/220...240 3DIM
Metal halide lamp 50 W (-E1)
– 50 W
– Base E27
– Approved for open lamps
For example
OSRAM HCI-E/P 50 W/830 WDL PB coated
32
© Festo Didactic 8064066