Metra 95-8912HG Instrucciones De Instalación página 3

ISO DDIN radio provision
1. Attach the (4) panel clips provided to
the radio trim panel (Figure A)
2. Secure the radio brackets to the radio
using screws supplied with the radio.
(Figure B)
3. Locate the factory wiring harness and
antenna connector in the dash and
complete all necessary connections to the
radio. Metra recommends using the proper
mating adapter from Metra and/or AXXESS.
Test the radio for proper operation .
4. Slide the radio into the dash, then secure
using the factory screws. Clip the radio
trim panel over the completed assembly
to complete the installation.
KIT ASSEMBLY
(Figure A) (Figure B)
REV. 3/24/2021 INST95-8912HG
3