ARENDO 304906 Manual Del Usuario página 25

5. Usage
Press the Lid-opener (4). The tilting lid opens. Fill the kettle with cold water and
press the lid down until it locks into place.
Note: A scale is provided on the inside. Do not fill the container above the maximum
mark. The boiling water may spurt out if the kettle is overfilled. Then, place the ket-
tle on the base plate. Press the "ON/OFF" button (6). The boiling process starts and
the button starts to glow. As soon as the water reaches the set temperature, the
kettle switches off. The heating element switches off automatically and the boiling
process is stopped. The appliance can now be lifted and the water can be used.
6. Descaling and cleaning
We recommend to descale the kettle at regular intervals depending upon the in-
tensity of use. Before cleaning, pull out the power plug and wait until the appliance
cools down completely. The anti-scale filter is located in front of the spout opening.
Open the lid and press the plastic tab of the anti-scale filter down to remove the
filter. Rinse the filter thoroughly using warm water and then replace it back into its
position. When replacing, ensure that the anti-scale filter sits properly in the guide
rail. Please use only commercially available descaling agents based on citric acid to
descale the water container. For the appropriate dosage, please refer to the speci-
fications on the package or insert of the descaling agent. The heating plate should
not be specifically cleaned. Do not use any hard objects on the heating plate. Use
only a damp cloth for cleaning the kettle externally. Do not use any abrasive items
like wire brush or steel sponge for cleaning. Never use any cleaning agents which
may corrode the surface or present a health risk if consumed! Never immerse the
appliance, the power cable or the plug in water or in any other liquid to prevent
risk of electric shock.
25
English