Fein WSG10-115T Manual Del Usuario página 23

3 41 01 122 06 0.book Seite 23 Montag, 29. August 2011 3:38 15
Original instructions angle grinder.
Symbols, abbreviations and terms used.
Symbol, character Explanation
General prohibition sign. This action is forbidden!
Do not touch the rotating parts of the power tool.
Observe the instructions in the text or graphic opposite!
Make sure to read the enclosed documents such as the Instruction Manual and the General
Safety Instructions.
Before commencing this working step, pull the mains plug out of the socket. Otherwise there
will be danger of injury if the power tool should start unintentionally.
Use eye-protection during operation.
Use ear protection during operation.
Use protective gloves during operation.
An exposed surface is very hot if touched and therefore dangerous.
Gripping surface
Additional information.
This sign indicates a possible dangerous situation that could cause severe or fatal injury.
WARNING
Confirms the conformity of the power tool with the directives of the European Community.
Worn out power tools and other electrotechnical and electrical products should be sorted
separately for environment-friendly recycling.
Product with double or reinforced insulation
Low speed
High speed
Character Unit of measure,
international
n /min
P W
1
P W
2
V
Hz
M... mm
Ø mm
mm
Ø
H
Ø
D
T
Unit of measure, Explanation
national
rpm Rated speed
W Power input
W Output
V Rated voltage
Hz Frequency
mm Size of metric thread
mm Diameter of a round part
mm Ø =max. diameter of grinding/cutting disc
D
Ø =Diameter of mounting hole
H
T=Thickness of grinding/cutting disc
en
23