English
The microscope is safe for health, life and property of the consumer and the environment when properly
used; the microscope meets the requirements of international standards. The microscope is designed for
observing transparent objects in the transmitted and reflected light using the bright field method, for
biological use and teaching demonstrations.
Levenhuk DEM200 digital camera was exclusively designed for use with this microscope. It allows transfer of
the precise image of the observed object to your PC display. ScopePhoto software is included in the pack-
age; it allows viewing and editing of the received images.
Linear field in the images space
Upper/Lower illumination power supply
Speed (depends on the PC model)
www.levenhuk.com
Magnification
Magnification of objective
Eyepiece magnification
Barlow lens
Tube length
Stage dimensions
Stage moving range
Illumination
Camera model
MAX resolution (at rest)
Megapixels
Pixel size
Sensitivity, v/lux-sec @550 nm
Video recording
Active range
Location
Image format
Field of view diameter
Spectral range
Programmable options
System requirements
Software
Power supply
Temperature range
40x-1280x
4x, 10x, 40x
10x, 16х
2x
18 mm
160 mm
95x95 mm
0 to 15 mm
batteries or AC adapter
LED
DEM200
1600x1200
2
Sensor
1/4" CMOS
2.8μm X 2.8μm
1
15 fps
Yes
68dB
ocular tube (not eyepiece)
BMP, TIFF, JPG, PICT, SFTL etc.
18 mm
400-650 nm
Image size, brightness, white balance, exposure
control, etc.
Slot
USB 2.0, 480 Mb/s
Windows 2000/XP(SP2)/2003/Vista; USB port
USB 2.0 driver, ScopePhoto
via USB cable
-30...70 °C
General information
Specification