Resetting The Adjustments (Reset); Additional Settings (Option); Adjusting The Backlight - Sony SDM-M51 Manual De Instrucciones

Resetting the adjustments (RESET)

This monitor has the following two reset methods. Use the
RESET menu to reset the adjustments.
1
Press the MENU button.
The main menu appears on the screen.
2
Press the M(+)/m(–) buttons to select 0 (RESET)
and press the OK button.
Reset the settings according to the following instructions.
Resetting the adjustment data most appropriately
for the current input signal
Press the M(+)/m(–) buttons to select SCREEN RESET
and press the OK button.
The automatic picture quality adjustment function of this monitor
automatically adjusts the picture position, phase, and pitch, to the
most appropriate value.
The RESET menu is automatically returned to the main menu
after the adjustment data is reset.
Resetting all of the adjustment data
Press the M(+)/m(–) buttons to select ALL RESET and
press the OK button.
The RESET menu is automatically returned to the main menu
after the adjustment data is reset.
To cancel resetting
Press the M(+)/m(–) buttons to select
OK button.
The RESET menu returns to the main menu without resetting the
adjustment data.

Additional settings (Option)

You can adjust the following options:
• BACKLIGHT
• POWER SAVE
• LANGUAGE
• MENU LOCK
1
Press the MENU button.
The main menu appears on the screen.
2
Press the M(+)/m(–) buttons to select m.
The option menu appears on the screen.
3
Press the M(+)/m(–) buttons to select the desired
option item and press the OK button.
Adjust the selected option item according to the following
instructions.

Adjusting the backlight

If the screen is too bright, adjust the backlight.
First press the M(+)/m(–) buttons to select
(BACKLIGHT) and press the OK button. Then press
the M(+)/m(–) buttons to adjust the desired light level.
and press the
Setting up the power saving mode
This monitor has a function which enables it to enter the power
save mode automatically according to the power saving settings
of the computer. You can prevent the monitor from entering the
power saving mode by setting the following option to OFF.
For more information of the power saving mode, see page 17.
First press the M(+)/m(–) buttons to select
SAVE) and press the OK button. Then press the
M(+)/m(–) buttons to select either ON or OFF.
BACK L I GH T
1 0 0
EX I T
ZZ...
POWER S A V E
ON
OF F
EX I T
GB
(POWER
(continued)
15