Bestway Hydro-Force 65336 Manual Del Propietário página 2

4. Inflate the board by unscrewing the cap of the air valve (Fig.2 Pos.1). Ensure that the
inner spring valve is not depressed. If it is depressed (Fig.2 Pos. 2), press the spring valve
and turn counter clockwise so the inner spring valve is in the correct position (Fig.2 Pos. 3).
Attached the hose to the inflate position on the high-pressure hand pump. Inflate the board
to 1.17bar (17 psi). After inflation, screw the cap of air valve (Fig.2 Pos. 4)
NOTE: If over-inflation occurs, press the spring valve to release air to an acceptable level
and securely fasten the air valve.
NOTE: If the board is not in use and exposed under the sun, it may cause overexpansion
and damage the board.
Check the pressure and deflate slightly until the correct pressure is obtained.
NOTE: Pressure gauge is for inflation purpose only, and the value of the pressure gauge is
just for reference, should not be used as a precision instrument.
Fig. 1
Battery Replacement Instruction
1
3
Note: Use a coin (not included) to open the battery box.
Maintenance:
1. Inflate according to the PSI marked besides the valve;
2. To avoid the long-time exposure to sunshine or rain, put the outside cover on top for protection when it not being used;
3. Clean it with mild soap water and soft cloth in case it is not going to be used for a long time. Dry it before putting them away. Store it at a dry and shady place and keep it out of reach of
Children.
Storage
1. Deflate the board by unscrewing the cap of air valve, press the spring valve and turn clockwise.
2. Remove all the accessories from the board. Use a cloth to gently dry all surfaces. Keep the board and all accessories clean and dry.
3. Fold the board from front to back to remove additional air.
4. Store in a cool, dry place and out of children's reach.
NOTE: Do not unfold this product when the temperature is low, leave the product in the room temperature (over 20ºC) for 24 hours before inflation.
Repair
• Fully clean the area to be repaired.
• Cut the correct size from the repair patch material.
• Apply only the amount of glue (not included) needed to cover the repair site.
DISPOSAL
Meaning of crossed-out wheeled dustbin:
Do not dispose of electrical appliances as unsorted municipal waste, use separate collection facilities.
Contact your local government for information regarding the collection systems available.
If electrical appliances are disposed of in landfills or dumps, hazardous substances can leak into the groundwater and get into the food chain, damaging your health and well-being.
When replacing old appliances with new ones, the retailer is legally obligated to take back your old appliance for disposals at least free of charge.
303021218555_21x28.5cm_20季运动板（长板）说明书V2_65336_英
Fig. 2
1 2 4
3
5. Attach the safety rope to the tow ring, and place the belt around your ankle (Fig.3).
Fig. 3
Deflation
2
2
+
-
+
-