Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
ASSEMBLY INSTRUCTIONS
Attach Center Section To Cargo Basket
1. Place center section assembly onto the cargo basket, lining up the
four holes in center section with the holes in the four mounting tabs on
the cargo basket. FIG 3.
2. Install four, 7/16 hex bolts and lock nuts as shown.
3. Tighten all 7/16-14 GR5 bolts to 55 ft–lb.
Vehicle Mounting Instructions
1. Receiver hitch uses anti-rattle pin, lock washer and clip as shown.
Insert pin from drivers side only. FIG 4. Tighten with supplied wrench.
3
Mounting Tab
7/16 x 1" Hex Lock Nut
4
5/8" Anti-rattle
Pin
PAGE 3
Center Section Assembly
7/16 x 1" Hex Bolt
Lock
Washer
Clip
Publicidad
Tabla de contenido
