Socket Function; Cleaning And Care - Klarstein REINRAUM Manual Del Usuario

SOCKET FUNCTION

If you want use the socket function, please open the lid. Then insert the plug into the socket.
Depending on the position of the switch, the vacuum cleaner is switched on or off.
I The socket is not electrified. The vacuum operates.
O
The socket is not electrified. The vacuum is switched off.
The vacuum cleaner is switched off. If the plug is being used by an
external device, the vacuum cleaner starts to operate after 5-8 seconds.
II If the plugged device is being switched off, the vacuum cleaner will run
for another 5-8 seconds. This is particularly helpful when using a drilling
machine.

CLEANING AND CARE

Barrel Cleaning
After working or when the barrel is full of dust which cause suction decreases
considerably, you should cut off the electricity and clean the dust away from the barrel.
• Unfasten the locking knob, lift up the top cover.
• Take off the filter bag, clean the dust away in the dust barrel.
• Install the filter bag back and place the top cover.
EN
17