Epson ELPLX01 Manual Del Usuario página 5

Removing and Attaching the Lens Unit
Depending on the projector being used, procedures and illustrations may differ from the
explanations. Make sure you read the User's Guide supplied with the projector.
Attaching
Caution
v When attaching the lens unit, remove the power plug from the electrical outlet first.
vDo not attach the lens unit when the projector's lens insertion section is facing up. Dust or dirt
could enter the projector.
vTry not to touch the lens section with your hand or fingers. If fingerprints or oils are left on the
surface of the lens, projection quality deteriorates.
Procedure
A
Remove the lens covers (2 types) from the lens unit.
Use the covers when storing or transporting the lens unit
on its own. Keep the lens covers in a safe place.
B
Pull the lens replacement cover straight out.
Keep the lens replacement cover in a safe place.
C
Hold the lock lever and turn it counterclockwise.
5