Weber 178723 Instrucciones página 3

1. Install the motor bracket
Attach the stainless steel motor bracket
to the left side of the cooking box, using
the 1/4-20 fasteners and the 1/4-20
Keps nuts.
2. attach the motor
Slide the motor onto the stainless steel
motor bracket.
3. attach the Counterweight to the
rotisserie shaft
Unscrew the retaining loop, put the
counterweight assembly in place,
reattach the retaining loop.
4. Put the spit Forks on the
rotisserie shaft
Slide the forks onto the shaft so that the
tines are facing each other. Screw in the
thumb screws to hold the forks in place.
5. Insert the rotisserie shaft in the
motor
Insert the pointed end of the rotisserie
shaft into the motor.
assembly
3