Publicidad
Step 13
Push four LEVELER BRACKETS (32G) over the exact holes shown in the bottom edges of the ENDS (A and B).
å
Using your hammer, gently tap a PROPEL NUT (14M) into the holes in the LEVELER BRACKETS (32G) and ENDS (A and B).
å
Now, turn a LEVELER (16E) into each PROPEL NUT.
NOTE: Position the BRACKETS exactly as shown.
å
14M
16E
Page 18
B
32G
Use this hole on the second unit if you
will be standing them side by side.
422407
A
www.sauder.com/services
Publicidad
