Attaching The Work Bowl Cover; Installing The Dicing Kit - KitchenAid KFP1356 Instrucciones

ASSEMBLING THE FOOD PROCESSOR
Attaching the wor_k bowl cover_
NOTE: Be sure to install the desired accessory before attaching the work bowl cover.
Place the work bowl cover on the work
1
bowl with the feed tube just to the left
of the work bowl handle. Grasp the feed
tube and turn the cover to the right until
it locks into place.

Installing the dicing kit

Drop the drive adapter over the power
1
shaft.
TIP: You may need to adjust the drive
adapter with a slight turn on the power
shaft until it drops into place.
Drop the dicing kit base onto the
3
drive adapter and make sure it is
firmly in place.
12
W10782139A_EN_v04.indd 12
Fit the food pusher into the 3-in-1
2
feed tube. See "Using the 3-in-1 feed
tube" for details on working with
different sized foods.
Drop the disc adapter onto the drive
2
adapter and push until it clicks firmly
into place.
Insert the dicing blade into the dicing
4
kit base.
A
2/26/15 2:32 PM