Philips 26HF9472/12 Manual De Instrucciones página 7

In the Program Installation sub-menu, program settings can be set. When this menu is open, all the
protections are inactive.
• Program No.: The program type can be selected with the cursor left/right buttons. These buttons
will toggle between all available types: "TV", "INFO", "PAYTV" and "RADIO".
If the program number of a certain type is 0, the corresponding type is not displayed. In order to
display a program number of the above-mentioned types, always enter two numbers, for example:
"01" for TV1 or digit "1" and up/down cursor.
• Input: The "Input" menu item selects the desired input source that will be assigned to the program.
Possible values are Tuner, AV1, AV2, AV2YC, RADIO, VGA, and DVI. Some input sources may
not be available on certain sets (see accompanying table).
Model / Input AV1
15HF8442 Scart1
20HF7462 Scart1
23/26HF9472 Scart1
30HF9442 Scart1
42HF9442 Scart1
Note: When a SmartCard XPress Box is used, it is usually connected to Scart1.
AV2 AV2YC
Video in S-video in
Video in S-video in
Scart2 CVBS Scart2 YC
Scart2 CVBS Scart2 YC
Scart2 CVBS Scart2 YC
- 7 -
AV3 AV3YC
- -
- -
- -
Video in S-video in
- -
VGA DVI
VGA -
- -
VGA DVI
VGA -
VGA -