Connect The Power Adaptor; Connect The Dynadock™ To Your Computer - Toshiba dynadock V3.0 Guía De Usuario

20
Setting Up the dynadock™ and Connecting Peripherals
Setting up the dynadock™

Connect the power adaptor

1 Plug the AC adaptor into the DC-IN jack on the back of the
dynadock™.
(Sample Illustration) Connecting the AC adaptor to the dynadock™
2 Connect the AC adaptor to a live electrical outlet.
The power light on the front panel glows blue when the
dynadock™ is powered ON.
Connect the dynadock™ to your computer
1 Connect the square end of the provided USB cable into the
USB type B connector on the back of the dynadock™.
(Sample Illustration) Connecting the 3.0 USB cable
2 Connect the other end of the USB cable to an available USB
port on your computer.
Windows
appropriate device drivers.
P
P R
U -1
8 2
5 0
P A
7 A
in e
2 .3
C h
e n
1 9 V
u e
r iq
a b
/ F
in a
C h
in
d e
M a
®
automatically detects the device and installs
R P
1 P
U -
8 2
5 0
P A
7 A
in e
2 .3
C h
e n
V
1 9 u e
r iq
a b
/ F
in a
C h
in
d e
M a