Toshiba dynadock V3.0 Guía De Usuario página 28

28
Using the dynadock™ and Adjusting Settings
Adjusting video settings
The dynadock™ supports the following display modes:
Resolution
640 x 480
720 x 400
800 x 600
832 x 624
848 x 480
1024 x 768
1152 x 864
1152 x 870
1280 x 720
1280 x 768
1280 x 800
Please note the following:
❖
Interlaced modes are not supported.
❖
The display modes listed above may not be supported by your
display, or your display may offer additional modes not
supported by the dynadock™. For information on display
modes supported by your display, be sure to check the
documentation supplied with your display. Select a mode that
both the dynadock™ and your display support.
❖
If you are using Mirror mode to clone the primary display's
image on an external display, the dynadock™ will attempt to
use the same display mode on the external display that you
selected for the primary display. In some cases, however, this
may not be the most appropriate mode for the mirrored desktop
(for example, if the aspect ratio of the displays is not the same).
In these cases, change the primary display mode to match the
optimum display mode for the external display.
NOTE
Refresh Rates (Hz)
60, 72, 75, 85
70, 85, 88
56, 60, 72, 75, 85
75
60
60, 70, 75, 85
75
75
50, 60
60, 75, 85
60
Placing a display into an unsupported mode for long periods can
damage it.
For more information on supported modes, refer to the
documentation supplied with your display.
Resolution
1280 x 960
1280 x 1024
1360 x 768
1366 x 768
1368 x 768
1400 x 1050
1440 x 900
1600 x 1200
1680 x 1050
1920 x 1080
2048 x 1152
Refresh Rates (Hz)
60, 85
60, 75
60
50, 60
60
60, 75, 85
60
60
60
50, 60
60