Connecting Audio Devices; Audio Recording - Toshiba dynadock V3.0 Guía De Usuario

22
Setting Up the dynadock™ and Connecting Peripherals
Connecting your peripherals
NOTE
You can customize the video settings of the dynadock™. See
"Adjusting video settings" on page 26

Connecting audio devices

The dynadock™ provides multiple audio ports, as shown in the
following illustration.
(Sample Illustration) dynadock™ audio ports
The following table indicates which port to use for each type of
audio activity:
Use this port:
Headphone jack
Microphone jack
If no output is seen on the display connected to the dynadock™, the
current video resolution setting may not be supported by the display.
This can happen if the display does not report its supported modes
to the dynadock's HDMI™ component. Adjust the resolution of the
external display until an image appears. For more information, see
"Using the TOSHIBA dynadock™ V3.0 Utility" on page
Headphone jack
Microphone jack
for more information.
Audio Device:
Headphone/headset/
speakers
Microphone/headset
24.
Activity:
Audio playback

Audio recording