Optika Italy M-1037 Manual De Instrucciones página 5

6. Assembling
6.1 Assembling the system
1. Insert the gout attachment ① on the frame and
lock the locking screw ② with the provided allen
wrench. (Fig. 1)
2. Insert the optical head on the gout attachment
lens and lock the locking screw with the provided
Allen wrench. (Fig. 2)
3. Insert the analyzer ① into the gout attachment.
(Fig. 3)
4. Place the polarizer ④ on the light exit at the base
of the microscope with the white engraving facing
the user. (Fig. 4)
Page 5
②
③
①
Fig. 1
Fig. 2
Fig. 3
④
Fig. 4