Listening To Fm And Am Radio Stations; Connecting Antennas; Tuning Radio Stations - Yamaha TSX-100 Manual De Instrucciones

Listening to FM and AM radio stations

Connecting antennas

AM loop antenna (supplied)
1 2
The cable of AM loop
antenna
Indoor FM
antenna
(supplied)
TUNER
FM ANT
75 UNBAL.
GND
AM ANT
Ground
(GND terminal)
Note
The wire of the AM loop antenna is shield type. Connect the
white wire to AM ANT terminal and connect the black wire to
GND terminal.
About grounding
For the maximum safety and minimum interference, connect
the antenna GND terminal to a good earth ground. A good
earth ground is a metal stake driven into the moist earth.
16
En
Listening to FM and AM radio stations
3
1
2
3

Tuning radio stations

TUNER
TUNE
RANDOM
TUNER
TUNE
Press and hold.
y
• While listening to the AM radio station, rotate the antenna head
to find the best angle for reception.
• You can also tune radio stations manually by pressing TUNE
/
repeatedly.
• To increase the quality of the FM sound under the weak radio
wave, press and hold RANDOM on the remote control to
change the FM radio wave reception mode of this unit to the
monaural mode.
■ To switch the frequency step
Because the interstation frequency spacing differs in
different areas, you may need to switch the frequency step
mode. The default step setting is AM 9 kHz/FM 50 kHz.
Switching frequency step
1 Turn on the power.
2 Press both PRESET u and SLEEP on the top panel.
3 Press / on the remote control repeatedly to select
TUNER display.
4 Press / on the remote control to select desired frequency
step.
TUNER 10/100:AM 10 kHz/FM 100 kHz step
TUNER 9/50:AM 9 kHz/FM 50 kHz step
5 Press ENTER on the remote control to confirm.
y
The frequency step in North, Central and South America is AM
10 kHz/FM 100 kHz.
Select FM or AM.
FM
87.50MHz
PRESET
ENTER
FM
89.70MHz