AM radio is available only for U.S.A. model.
Selecting an FM/AM station
To listen to a FM/AM station, connect the antenna as described in "Connecting the speakers and antenna" (P. 2).
1
2
Display information (remote control only)
If you press DISPLAY on the remote control, the information shown on the front panel display will be switched in the
following order.
LISTENING TO FM/AM STATIONS
Preset number and frequency
* Example of reception status indication (the STEREO/MONO indication is not shown while
receiving an AM broadcast).
TUNED/STEREO: A strong FM stereo broadcast is being received.
TUNED/MONO:
Not TUNED:
1
Press the RADIO source button to switch the
audio source to FM/AM.
2
Tune FM/AM stations
Automatic tuning: Press and hold TUNING
Manual tuning: Press TUNING
If you tune to a station manually while receiving FM, the sound
will be monaural.
Reception status*
A monaural FM broadcast is being received (even if the FM
broadcast is stereo, reception will be monaural if the signal is weak).
No broadcast is being received.
/
.
/
repeatedly.
11
En