Parts Diagram - Sani-tip 122280N Manual Del Usuario

INDICATIONS FOR USE
Used to transmit air or water to the operatory field
during operative procedures.
WARNINGS
• Sani-Tip Conversion Kits are designed to function exclusively with Sani-Tip disposable syringe tips. To
®
minimize physical harm to patient, or equipment damage and/or malfunction, use only adapter compo-
nents and clear Sani-Tip plastic syringe tips manufactured by DENTSPLY Professional for the Sani-Tip
System. Follow the enclosed instructions.
• Sani-Tip disposable syringe tips are for single use only. Dispose after use.
®
• It is the responsibility of the Dental Healthcare Professionals (DHCP) to determine the appropriate uses
of this product and to understand the health of each patient, the dental procedures being undertaken, and
industry and governmental agency recommendations, requirements, and regulations for safe practice of
dentistry.
• To ensure adequate protection from cross contamination from other devices connected to the Dental
Unit, it is highly recommended that the Dental Unit be installed with anti-retraction features. Addition-
ally, the Dental Unit, including the anti-retraction features, must be properly maintained and periodically
tested. For more information, please contact your Dental Unit manufacturer.
• Where asepsis is required or deemed appropriate in the best professional judgement of the DHCP, this
product should not be used.
PRECAUTIONS
• To help reduce cross contamination, use a new Sani-Shield disposable air/water syringe sleeve, in addi-
tion to a new Sani-Tip disposable tip, for every patient.
P-1 CONVERSION KIT AIR/WATER SYRINGES
2
CONTRAINDICATIONS
This Conversion Kit is not indicated for use with
any other air/water syringes.

PARTS DIAGRAM

STANDARD TIP 76mm
®
1. Sani-Tip 4. O-ring
2. Thumb Nut 5. Adaptor
3. Plastic Cone 6. O-ring
7. O-ring
Hex Key
®