Removing The Front Cover - Yamaha NS-M225 Manual De Instrucciones

Removing the front cover

The front cover is attached to protect the speaker
unit, but you can remove it if necessary.
The front cover is fixed by magnets. Hold the
speaker with one hand, and pull the front cover
gently with the other to remove it.
Notes:
• When removing the cover, be careful that you don't
touch the drive units, and don't exert excessive
force with any tools.
• There are magnets on the reverse side of the front
cover. Do not place the front cover close to objects
that might be affected by magnets, such as TVs,
clocks, magnetic cards, diskettes etc. after
removing it.
Specifications
Type
.......... 2-way acoustic suspension speaker system
Driver......................8 cm (3.1 ") cone woofer x 2
3 cm (1 ") balanced dome tweeter
Impedance ......................................................6 Ω
Frequency Response...................65 Hz to 50 kHz
Rated Input Power ....................................... 40 W
Maximum Input Power.............................. 120 W
Sensitivity................................... 86 dB/2.83 V/m
Crossover Frequency .................................. 3 kHz
Dimensions (W x H x D)
....... 107 (4.2") x 360 (14.1") x 133.7 (5.3") mm
Weight ..........................................2.4 kg (5.3 lbs)
* Specifications are subject to change without
notice due to product improvements.
magnetic shielding type
5
E-