Removing The Front Cover - Yamaha NS-125F Manual Del Propietário

Ocultar thumbs Ver también para NS-125F:
Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

Removing the front cover

The front cover, which is attached to each speaker
at six points, can be removed if desired. To
remove a cover, using both hands, gently pull the
top of the cover away from the speaker. When the
cover comes away, gently pull the bottom of the
cover away from the speaker. To reattach the
cover, line up the six holes on the cover with the
six pegs on the speaker, and gently push the cover
onto the speaker.
Note:
When removing the cover, be careful that you don't
touch the drive units, and don't exert excessive force
with any tools.
4
E-
Specifications
Type.................2-way bass-reflex speaker system
magnetic shielding type
Drivers...... 2.2 cm (7/8 ") balanced dome tweeter
8 cm (3.1 ") cone woofer x2
Impedance ...................................................... 6 Ω
Frequency response....................... 60 Hz–35 kHz
Nominal Input power ...................................40 W
Maximum input power...............................120 W
Sensitivity................................... 86 dB/2.83 V/m
Crossover frequency....................................6 kHz
Dimensions (with the stand)
(W ✕ H ✕ D)
.....236 (9.3 ") ✕ 1050 (41.3 ") ✕ 236 (9.3 ") mm
Weight ........................................ 7.2 kg (15.9 lbs)
* Specifications are subject to change without
notice due to product improvements.

Publicidad

Tabla de contenido
loading

Este manual también es adecuado para:

Ns-125fp

Tabla de contenido