9
PRESSURE EQUALISATION ELEMENT
Pressure equalisation element to prevent condensation inside the housing. In order to ensure its proper function, the element must be
protected from contamination.
10
CHARGING SOCKET
Charging socket for charging the internal battery. Charging the battery is permitted only in dry interior areas. Only charge with the optionally
available CLDROPB1PS6 charging device.
11
CHARGE DISPLAY
The display LED lights up red when the charging device is correctly connected to the charging socket and the internal battery is charging.
The LED turns green when the battery is fully charged.
12
INFRARED SENSOR
Infrared sensor for control via IR remote control (optionally available).
13
MAGNETIC MOUNT
Four powerful magnets provide secure mounting for the diffusers, half dome filter and lens hood.
OPERATION
PLEASE NOTE
• When the spotlight is switched on, the following is displayed in succession during the start-up process: "Software Update Please Wait..."
(for service purposes only), "Welcome to Cameo", the model name and the software version. After this process, the spotlight is ready for
operation and the previously activated operating mode is launched.
• Main display 1 is activated automatically after approximately one minute of no input. Briefly press MENU to navigate up one level in the
menu structure.
• Briefly pressing UP in the control panel when in the main display rotates the display by 180°.
• To quickly change a value, such as the DMX start address, press and hold the control UP or DOWN.
• To reset and ready the W-DMX module for pairing directly from main display 1, press and hold control DOWN for around 3 seconds.
MAIN DISPLAY 1 DMX OPERATING MODE
The display shows DMX address and current DMX start address (in the example: 001).
DMX Address
001
DMX Address
MAIN DISPLAY 1 STANDALONE MODE
001
Mode
The display shows the currently activated standalone mode (Mode Static, Mode Auto, Mode User Color, Mode Color Macro).
Static
Mode
Static
Menu
DMX Address
DMX Mode
MAIN DISPLAY 2 FIXTURE STATUS
Menu
DMX Delay
The display shows the W-DMX and battery status. Switch between both main displays by briefly pressing ENTER and DOWN at the same
DMX Address
Stand Alone
time. Main display 1 is automatically shown again after around one minute.
DMX Mode
Settings
DMX Delay
System Info
Stand Alone
ess
Fixture Status
Settings
-------- Menu --------
System Info
DMX Address
W-DMX™
DMX Mode
Mode
-------- Menu --------
To pair the W-DMX receiver with a W-DMX compatible transmitter, W-DMX must be activated (W-DMX On) in the receiver's menu under
DMX Delay
Color Macro
Wireless Settings. The Reset command must be also executed under the same menu item (select Reset and confirm with ENTER). The
DMX Address
Stand Alone
receiver is now in pairing standby and waiting for a pairing request from a transmitter. Start the pairing by selecting Link in the menu of the
DMX Mode
Settings
transmitter and then confirm; the pairing now takes place automatically. In the same way, several receivers can be paired to a transmitter
DMX Delay
System Info
either simultaneously or one after the other. A W-DMX connection is always maintained until the connection is disconnected by means of the
DMX Address
Stand Alone
ess
Reset command in the receiver or the Unlink command in the transmitter, regardless of whether a device has been disconnected from the
001 - 510
Settings
de
power supply in the meantime.
System Info
ay
ne
fo
-------
------
DMX Delay ------
-------- Menu --------
ess
Group
DMX Address
Fixture Status
Fixture Status
Mode
Color Macro
Mode
Color Macro
DMX Address
001 - 510
DMX Address
001 - 510
------
DMX Delay ------
Group
0
by DMX?
No/Yes
Mode
------
DMX Delay ------
Delay
0.0s
User Color
Group
0
by DMX?
No/Yes
------
DMX Delay ------
Delay
0.0s
Group
0
Menu
by DMX?
No
DMX Address
------
DMX Delay ------
Delay
0.0s
DMX Mode
Group
0
DMX Delay
by DMX?
No
------
DMX Delay ------
Stand Alone
Delay
0.0s
Group
0
Settings
by DMX?
No
System Info
------
DMX Delay ------
Delay
0.0s - 2.0s
Group
0
by DMX?
No
Stand Alone
Delay
0.0s - 2.0s
0
Static
Mode
User Color
Mode
User Color
Menu
DMX Address
DMX Mode
Menu
DMX Delay
DMX Address
Stand Alone
DMX Mode
Settings
DMX Delay
System Info
Stand Alone
Settings
System Info
Mode
Auto
------
DMX Delay ------
--------
Group
0
DMX Mode
by DMX?
Yes
3 CH
------
DMX Delay ------
--------
Delay
0.0s
4 CH
Group
0
6 CH
by DMX?
Yes
7 CH
Delay
0.0s
13CH01
13CH02
20 CH
Static
Dimmer
Mode
Auto
Mode
Auto
DMX Mode
3 CH
4 CH
DMX Mode
6 CH
3 CH
7 CH
4 CH
13CH01
6 CH
13CH02
7 CH
20 CH
13CH01
13CH02
20 CH
By DMX? -------
------
DMX Delay ------
Warning! Delay
Group
is controllable
by DMX?
By DMX? -------
------
DMX Delay ------
by DMX now!
Warning! Delay
Group
is controllable
by DMX?
by DMX now!
0
Yes
0
Yes
7