Ir Remote Control (Optional) - Cameo DROP B1 Manual De Usuario

ess Static
e Color Macro
y User Color
ne Auto
SYSTEM INFORMATION (System Info)
Starting from main display 1, press MENU to enter the main menu. Now use the UP and DOWN controls to select the menu item System Info
fo
and confirm with ENTER.
-------- -------- Menu --------
ess DMX Address
e DMX Mode
y DMX Delay
ne Stand Alone
Settings
fo System Info
This will take you to the submenu for accessing the system information (see table, selection with UP and DOWN, confirm with ENTER,
change status with UP and DOWN, confirm with ENTER).
System Info
Firmware = Displays device firmware
Temperature = Displays temperature of LED unit
Battery Power = Displays battery charge (percentage)
Operation = Displays operating time
Hours
MANUAL LOCKING FUNCTION
In addition to the ability to automatically protect the spotlight from accidental and unauthorised operation (see "Settings" – "Auto Lock"), the
controls can also be locked manually. Press and hold the UP and DOWN controls simultaneously for approximately 5 seconds. "LOCKED" is
now displayed and it is no longer possible to change the spotlight's settings via the controls. After approx. eight minutes, the current operat-
ing mode is displayed again. To unlock, press and hold the UP and DOWN controls simultaneously for approximately 5 seconds. The display
will show the previously displayed information.

IR REMOTE CONTROL (optional)

Activate infrared remote control in system settings under "IR remote" (IR Remote On). Aim the infrared remote control directly at the infrared
sensor built into the front of the spotlight. The maximum range is approximately 8 metres. Deactivate infrared remote control (IR Remote Off)
if you wish to control the spotlight via W-DMX.
BL/ON/OFF (Blackout)
Press the BL button to switch off all LEDs (blackout), regardless of the operating mode enabled via remote control. Press the BL button again
to reactivate the previously selected mode.
12
Program 1 Dimmer
|
Program 6
Firmware V1.xx
LED
C/F
Battery Power xxx%
Total xxxx:xxh
Speed
xxx°C / xxx°F
Unit Celsius (= display in degrees Celsius)
Unit Fahrenheit (= display in degrees Fahrenheit)
Displays total operating time in hours and minutes