Other Functions; Changing The Sound Settings; Adjusting The Balance And Fader - Bal/Fad; Customizing The Equalizer Curve - Sony CDX-GT11W Manual De Instrucciones

Other functions

Changing the sound settings

Adjusting the balance and fader
— BAL/FAD
1
Press the select button repeatedly
until "BAL" or "FAD" appears.
The item changes as follows:
t HI*
LOW* 1
FAD (front-rear) t AUX*
*1 When EQ lite is activated (page 8).
*2 When AUX source is activated (page 9).
2
Rotate the volume control dial to
adjust the selected item.
After 3 seconds, the setting is complete and
the display returns to normal play/reception
mode.

Customizing the equalizer curve

— EQ lite

"CUSTOM" of EQ lite allows you to make your
own equalizer settings.
1
Select a source, then press (EQ)
repeatedly to select "CUSTOM."
2
Press the select button repeatedly
until "LOW" or "HI" appears.
3
Rotate the volume control dial to
adjust the selected item.
The volume level is adjustable in 1 dB steps,
from –10 dB to +10 dB.
Repeat steps 2 and 3 to adjust the equalizer
curve.
To restore the factory-set equalizer curve,
press and hold the select button before the
setting is complete.
After 3 seconds, the setting is complete and
the display returns to normal play/reception
mode.
Tip
Other equalizer types are also adjustable.
8
t BAL (left-right) t
1
2
Adjusting setup items — SET
1
Press and hold the select button.
The setup display appears.
2
Press the select button repeatedly
until the desired item appears.
3
Rotate the volume control dial to
select the setting (example "ON" or
"OFF").
4
Press and hold the select button.
The setup is complete and the display returns
to normal play/reception mode.
Note
Displayed items will differ, depending on the source
and setting.
The following items can be set (follow the page
reference for details):
" " indicates the default settings.
z
CLOCK-ADJ (Clock Adjust) (page 4)
BEEP
To set "BEEP-ON" ( ) or "BEEP-OFF."
z
AUX-A*
1 (AUX Audio)
To turn the AUX source display "AUX-A-ON"
( ) or "AUX-A-OFF" (page 9).
z
A.OFF (Auto Off)
To shut off automatically after a desired time
when the unit is turned off: "A.OFF-NO" (
"A.OFF-30S (Seconds)," "A.OFF-30M
(Minutes)" or "A.OFF-60M (Minutes)."
DEMO* 1 (Demonstration)
To set "DEMO-ON" (
z
DIM (Dimmer)
To change the brightness of the display.
– "DIM-ON": to dim the display.
– "DIM-OFF" ( ): to deactivate the dimmer.
z
M.DSPL (Motion Display)
– "M.DSPL-ON" ( ): to show moving patterns.
z
– "M.DSPL-OFF": to deactivate the Motion
Display.
A.SCRL (Auto Scroll)
To scroll long displayed item automatically
when the track is changed.
– "A.SCRL-ON" ( ): to scroll.
z
– "A.SCRL-OFF": to not scroll.
LOCAL (Local Seek Mode)
– "LOCAL-ON": to only tune into stations with
stronger signals.
– "LOCAL-OFF" ( ): to tune normal reception.
z
),
z
) or "DEMO-OFF."