Ryobi RY15518 Manual Del Usuario página 9

ATTAChINg ThE STORAgE hANgER
See Figure 10.
There are two ways to hang the attachment for storage.
 To use the hanger cap, push in the button and place the
hanger cap over the end of the attachment shaft. Slightly
rotate the cap from side to side until the button locks into
place.
 The secondary hole in the attachment shaft can be used
for hanging purposes as well.
STORINg ThE ATTAChMENT
 Store the attachment in a dry, well-ventilated place that
is inaccessible to children.
 Keep away from corrosive agents such as garden chemi-
cals and de-icing salts.
lower flange
washer
holding pin
inserted into
aligned slots
All manuals and user guides at all-guides.com
MAINTENANCE
blade nut
blade
flange
Fig. 8
1/2 in.
socket wrench
hanger
cap
hole
button
9 — English
Fig. 9
secondarY
hole
Fig. 10